NFLH GPS LH002

LH002 GSM/GPS two-way car alarm system, suitable for all 12V cars,Mobile APP remotely start the engine.

Sale link：https://www.aliexpress.com/item/1005002776239342.html?spm=5261.ProductManageOnline.0.0.1f774edf6LZbA9

LH002 mobile phone controlled car GSM two-way car alarm system, suitable for all 12V cars, remotely start the engine. LH-002 is a two-way car alarm system with GSM/GPS function, suitable for all 12V cars (some cars with chip lock function need to add a bypass controller). Consumers can use a two-way remote control to control the car, or use a mobile phone APP to control the car, as long as there is a GSM network signal, the car can be controlled, no distance restriction, no border barriers. This system is 2G communication. If your international network does not have a 2G network signal, please contact us. We will have 4G network products listed in the future. Thank you for your approval, if you have any questions, please email us (sznflh@qq.com), we will serve you wholeheartedly. LH-002 instructions The LH-002 module adopts 4 frequency 2 G communication module, power supply voltage 9-15 V, power consumption current 20 MA, external connection +12 power lines and ON (ACC) lines. Use the following steps: A、Installation methods: 1、find 12 power supply (coarse red) on car alarm, connect. Find the ON/ACC line (coarse yellow) and connect. 2、 The black terminal connects the antenna box and the other end docks the special wire harness. The 8 P end of the special wire harness is connected to the 8 P terminal on the control box, and the other end is connected to the original 5 P socket of the host antenna of the alarm. 3、Select 2 G of SIM into the control box, and then connect the control box +12 power supply. B、Download APP and Registration Certification: 1、Scan the QR code on the side of the box, download and install "NFLH" APP, download, open all permissions options, and agree to APP the permission to push information to the phone. 2、After the download is complete, start registering the identity information (note: please use the commonly used email address as the user name, so that once the password is forgotten in the future, the only basis for retrieving the password is needed). The first line is to fill in the email address; the second line is to set up a APP login password; the third line is to repeat the APP login password; the fourth line is to enter the device's IMEI number (one line on the back of the host); the fifth line is to enter your license plate number. C、Use and operation: 1、Login APP： login APP, select "login ", enter email address and login password, click" login ", enter the main control interface. 2、Open the APP, and enter the main interface to see if the orange signal icon on the upper left is orange. If it is orange, it represents that the GSM card works normally and can be operated directly. If the signal icon is gray, the SIM card is not suitable for this control module or SIM card seat loose, can not connect to the network normally, please replace the SIM card. Alternatively, disconnect the power, connect again, wait 5 minutes, refresh (top right icon) APP interface status, and see if there is any change. D、APP Function Description: 1 Lock; 2 Unlock; 3 Remote start-up; Stop engine operation; Remote control of the rear door; 6 Positioning; 7 L window; 8 Sound and light search for vehicles; 9. Prevention of hijacking; 10 Temperature start settings; 11 Timing start settings; 12 internal temperature; 13 Vehicle voltage; 14 First page; 15. Maps; My (menu); 17GSM signals; 18 Mini-menu; 19 License plate numbers; Refresh the interface; 21 Information alerts;