NFLH GPS-LH9010

产品介绍:

Operation manual "driving from a mobile phone"

Hello dear consumers! Thank you very much for purchasing our company's controller products. We will provide service with all our hearts. The operation method is as follows:

Technical parameters: operating voltage of the controller 9V-15V, operating temperature -40 ° - + 80 °, operating current 150mA, SIM-card size 12 * 15, network model - GSM-2G communication card.

First you need to buy a GSM model with a rate (GPRS) SIM card (this cell phone does not support WCDMA). The SIM card slot goes out, insert the SIM card into the slot for inserting a mobile phone card.

Connect the GSM antenna, connect the GPS antenna, connect the 12V-2P power chip (insert the other end of the chip into the OBD interface). Attention: It is recommended to lay the GPS antenna in the position of the front windshield, in the recumbent position.

After turning on the power supply, scan the 2D barcode on the side of the packing box to download and install the APP. Attention, when installing APP, you need to open all the access rights of the mobile phone. In the case when the mobile manager software is installed in the mobile phone, you need to set it permission to receive the transmitted information from the APP.